With an easy-to-wear Bone Conduction design, the AfterShokz Air provides enhanced sound quality and increased comfort. There is a significant difference in the way Aftershokz Air pairs compared to conventional headphones. Here is a guide on How to Pair Aftershokz Air.
Recommendation: You can utilize AfterShokz Air with every device equipped with the wireless connectivity of 3.1 or higher.
Aftershokz Air headphones can connect to one or multiple devices. However, the choice is yours for which purpose you utilize the exclusive bone-conduction headphones. This article will mention a few relatable steps to pair Aftershokz Air.
How to Pair Aftershokz Air?
Bone conduction headphones, when paired, enhance the listening experience on one side and let you know everything occurring in the surroundings. So, there is no downside in establishing the link between Aftershokz Air and iPhone. To make aftershokz pair with other devices is the same as preparing them to become discoverable.
Switch off the Headphones
Start by switching off the headphones. If you are new to operating Aftershokz Air, look at the right-hand side of the control system and press the volume+ button. Hold on for 3-5 seconds until a voice assistant delivers a message as “Power Off.”
Switching the headphones on is crucial to make them ready to enter pairing/discovery mode. Hence, start by pressing the power/volume-up button, keep pressing the button for 5-7 seconds, and you will notice the device blink red and blue and prompt a beep indicating “Pairing.”
Aftershokz Air is ready to pair with different electronic devices such as PCs, Laptops, smartphones, or tablets. Moreover, it does not make a difference in whichever operating system you try to connect to.
Make a Connection
Open the Bluetooth settings of the connecting device, remember to turn it on, wait for the device to recognize the Air, and follow the instructions to connect. You will also receive the confirmation message in the form of a voice note that indicates “Connected”; the headphones blink blue for once.
How to Connect Aftershokz Air?
Discussing the versatility of the Aftershokz Air does not stop it from connecting to windows 10. Suppose you have difficulty watching your favorite shows on a mobile phone and want something enlarged to zoom the effects. The right choice is to forget the connection with a handy device and opt for a more convenient laptop. However, the steps are the same but still need attention.
Put the headphones into pairing mode by pressing the volume+ button for 5-7 seconds. Wait until the headphones beep and flash red and blue LED lights. Remember to start with the headphones turned off.
The next step is to look for the appropriate laptop settings to make a long-lasting connection. In this regard, open the Settings options and make your way directly to the Bluetooth and Other Devices; ensure to turn the Bluetooth on. When the laptop discovers Aftershokz Air, tap it to connect it. Do not forget to check the headphones’ blue light signifying “Connected.”
How to Pair Aftershokz to Multiple Devices?
As discussed above, Aftershokz Air can connect to multiple devices at the same time. The matter is more than just receiving both inputs simultaneously; you can switch between devices to make the best use of them. It Lets me connect my iPhone and iPad to Air with me in a straightforward manner.
To begin with, turn off the headphones and enable pairing mode. As soon you hear Audrey uttering “Pairing,” tap on the multifunction or Volume up or down buttons for 2-3 seconds. Wait until the headphones deliver a Multipoint Enabled message followed by Connected. The first device is successfully connected to Aftershokz Air.
To initiate the second connection, turn off the headphones and press the power/volume up button for 5-7 seconds. Pairing mode is activated when headphones blink red and blue. Open the Bluetooth list of the second device and tap to connect it. Once the connection is established, Audrey utters Device Two Connected.
AfterShokz Not Pairing
Why aftershokz is not pairing is not a question to neglect and surpass. Encounter failure in the initial pairing step proves a barricade in connecting the headphones to various devices. In addition, the headphones decline particular commands for some minor problems. So, glancing at them is imperative to minimize them further.
- Headphones lacking a total percentage of battery
- Both the connecting devices are not in close vicinity
- The pairing list of the connecting device reaches its limit
- The headset may already be in connection with another device
- The headphones and device are not upgraded to the latest updates.
How to Reset AfterShokz?
Resetting is the crucial part of AfterShokz Troubleshooting. All the faults are satisfied at reaching the level of it. You can easily reset the Aftershokz Air headphones, as it involves half of the pairing steps. The other half is assigned to the multifunction button and Volume down.
- Turn off the headphones.
- Enable pairing mode by turning on the headphones (press the Volume up button for a few seconds)
- Hold on for 5-7 seconds until the headphones start blinking red and blue
- Press the multifunction, Volume up and down buttons for 3-5 seconds
- Headphones reset and generate a beep in response.
Can You Wear AfterShokz Air in the Shower?
Aftershokz Air is IP55 rated and can resist light rains or excessive sweat. So, treat them as water-resistant, not waterproof, or avoid carrying them in showers or underwater.
Which is Better, Aeropex or Air AfterShokz?
Both headphones have perks, but analyzing their features simultaneously shows that Aeropex is more convenient. The reason is apparent with a longer battery life of 8 hours or IP67 waterproofing. Moreover, Aeropex upgrades to provide a quick charge feature which does not exist in Aftershokz Air.
How Long Should AfterShokz Last?
The shelf life of Aftershokz bone conduction headphones depends highly on the usage. If the discussion is about comparing the battery timing, these devices will last you for 8 hours of talk or play time. The highlighting point is that they serve more if utilized at recommended levels.
Why are My AfterShokz Blinking Red and Blue?
All the aftershokz headphones are equipped with LED lights to deliver concerning messages. Similarly, when the headphones look for other devices for pairing, they start blinking red and blue. You also notice headphones blink red and blue when a second device connects during multipoint pairing.
How to Pair Aftershokz With Other Models?
Why won’t my AfterShokz won’t pair?
There can be many issues:
- If you have an iPhone 6 or 6 Plus, they are incompatible with Aftershokz.
- There can be some bugs that can be solved by resetting.
- Look at the paired devices on your device; the paired devices list may be full.
Are AfterShokz Air waterproof?
No, Aftershokz Air is not waterproof, but with the rating of IP-55, they are water resistant. You can use them in the rain for some time; they are not recommended for swimming.
Are AfterShokz air any good?
There are several reasons to recommend the Aftershokz Air headphones. In addition to being comfortable to wear, these headphones have excellent sound quality; to top it all, they are Bone conduction headphones.
Does AfterShokz air have a mic?
Yes, a mediocre microphone is included with the AfterShokz Air headphones. In noisy environments, this mic will produce thin and distorted audio.
How do I check the battery level on my AfterShokz Air?
Pressing volume+ or Volume- while no music is playing lets you check the battery status. Audrey will tell you whether your battery is high, medium, or low.
How do I put AfterShokz air in pairing mode?
To enter the pairing mode, press and hold the volume+ button for about 5 to 7 seconds. When you are in pairing mode, the LED light will flash red and blue, and Audrey will say, “pairing.”
Are AfterShokz Air better than titanium?
Both are best, but if you are looking for a lightweight model, you should consider the AfterShokz Air. When it comes to sound quality, the AfterShokz Titanium is the ideal choice.
How do I turn on AfterShokz Air?
You must press the Volume + or Power button for 5-7 seconds. You will be in pairing mode after directly. If you have already paired the Aftershokz Air with a device, they will automatically be connected to that device if Bluetooth is ON.
How do I charge my AfterShokz Air?
A micro USB charger is included with your headphones so they can be charged. Under the protective flap, next to the volume+ button, you will find the micro USB charging port on the headphones. Chargers with USB ports fit into any USB port on a computer, wall adapter, or other chargers.
What is the difference between AfterShokz Air and Aeropex?
Compared to the AfterShokz Air Bone Conduction, the AfterShokz Aeropex Bone Conduction is improved. Even though both are Bone conduction headphones, the Aeropex is considerably better because it offers an extended battery life, along with the IP67 rating for dust and water resistance.
How do I answer a call on AfterShokz Air?
As soon as you hear a call coming in, click the multifunction button once. After that, a beep will sound, and you will be connected to the call.
Are AfterShokz air and Trekz Air the same?
Although the appearance of these headphones is similar, the Aftershokz Air headphones have been updated to be lighter and sound better.
Do you look for that particular pair of headphones to inculcate such pairing features? If yes, get on Aftershokz Air to ensure efficient pairing with the desired devices. Also, you get the advantageous feature of connecting your two favorite devices to bone-conduction headphones.