Imagine your headphones with a 40-hour battery life suddenly stop working. What will you do? Well, that happened to my headphones. Recently I found that my Beats Solo 3 Power Button Not Working, but as an established user, I knew the tweaks and different quick fixes to deal with this issue. 

In this quick guide, I’ll describe different ways to fix the beats solo power button not working problem in a detailed manner. There will be quick and easy-to-do solutions if your headphones won’t turn on or charge.

Fixing Beats Solo Power Button Not Working 

The main reasons why Beats Solo 3 power button malfunctions are the sweat, dirt, and humidity that accumulate in the power button. So, the first thing that, as a headphone user, you should do is to keep your headphones clean. If the power button starts causing problems, everyone should utilize the apparent steps to eliminate this issue. The steps are:

Complete Charge

Press the power button for a few seconds. If you do not see any change, you need to connect the charging cable to the charging port and let it charge for almost a day. After the complete charge, press the power button again for 5 to 7 seconds to turn it on. Most of the time, it solves the issues.

Hard Reset Beats Earphones

Another quick but little technical solution is the Hard Reset – it means you need to remove the battery from your Beats Solo 3. It is tricky; first, remove the cushions from both sides. You can use a sharp knife/ substance to open the left side of the headphones. 

Remember, don’t cut yourself and any wire. Unplug the wires connected to the battery and connect again; it will turn on your headphones. After that, close the lid again and enjoy your favorite music. 

Connect Through Aux or 3.5mm 

Pro Tip: Before going through any process, connect your headphones with the aux. If it works, it is a battery issue; otherwise, it is some hardware or firmware. 

Update Headphones Software/Firmware 

Keep your headphones updated with the latest version of the firmware. Always connect it to the Apple devices using the updated version; it will automatically update it. 

Beats Solo 3 Power Button Replacement

The last and most annoying solution is the Power button replacement, which will cause you a fortune. Go to the near Apple store or discuss your issue with Beats Support to solve this issue if your headset is in warranty. Otherwise, you can visit any nearby technician, or you can DIY. 

Can you reset Beats Solo 3?

The first and the most evident method that one should do is RESET your headphones. To reset, you need to press the power button and the volume down button for about 10 seconds – usually, it takes 12 to 15 seconds. The fuel gauge or lights flashing indicates that your Beats Solo 3 is ready to pair again after the reset.

What to do when Beats Solo 3 won’t turn off?

It is truly frustrating when your headphones become unresponsive to any action. When I tried to turn it off, it did not respond to button presses. If you are facing the same issue, then follow these steps:

  • First, connect your headphones with the charger.
  • Press the power button for almost 20 seconds or more. 
  • You will see the lights flashing.
  • Now disconnect the charger.
  • After that, press the power button till it turns off.

How to fix it when Beats Solo 3 not charging?

If you are facing the problem that your Beats Solo 3 is not charging and you are stuck with the almost dead Solo 3 headsets, then follow these quick steps:

  1. The most apparent step is to reboot your headsets.
  2. It is better to reset your device.
  3. Better check if your headphones are using updated firmware.
  4. Look if there is some adapter issue.
  5. Always cross-check the cable health.
  6. Hard reset the headset if necessary.
  7. Contact the Support to fix the issue.

Troubleshooting | Beats Studio 3 Won’t Turn ON or Charge

When facing turning on or charging issues, you need to reset your Beats Studio 3 as a quick solution and first-hand fix. It will mainly fix this issue; if it still prevails, the more reasonable solution is to charge it for a whole day and then restart it again. Other quick solutions include hard reset and updating the firmware of your Beats Studio that will help you reinstate your headphones. 

You can read our guides for:

Final Thoughts 

Did you get your quick solution yet or not? We have provided you with the most suitable and easy-to-do solutions to the Beats Solo 3 Power Button Not Working issue. In addition to this, there is another reliable guide to fixing the charging and turning off issues in detail.

Similar Posts